I have posted the 3rd slide show to you tube

http://www.youtube.com/watch?v=5LTU4rZvJg8

I really like this rod holder

I found this photo on a catfishing website. I think I will make one for the boat. Hmm maybe a cup holder on the end?

got it flipped...don't worry I will go back and fill in the process

Oh yeah its time epoxy.

Some tools of the trade. The foam whizzer didn't roll the Epoxy very well in the cold. I used fst hardener.
This is about 2.5 gallons of sanding dust from a hardwood floor resurfacing.
Time for a beverage.

I went around the boat with a jigsaw and trimmed the plywood. I had to trim the bow.
Used the fien tool.

Alright..remember all those little pieces.
time to tape them up.


Cant forget the bolt hole.

Laying out the glass

The bottom glass is made of 6 oz "e" glass and the sides will be 4 oz.
The bottom glass is 60" wide and the sides came in at 50" wide. I measured from the longest point of the transom to stem added 2' to the length and cut it. I the rolled it out on the clean...clean... oh did I say clean floor and cut it down the center of its length.